Southeast Texas CNC.
Our premium cookers are made in Texas, all hand crafted, over 10 years of experience.
Thicker than the competition and more affordable.
No assembly required, solid robust product that's built to last a lifetime.
Quality American aluminum is used, made with expert craftmanship.
Heavy duty construction, cookers are 3/16 thick, fully welded inside of the tank with attention to detail on every weld. We don't sell junk.
1.6 Sack /85qt
Crawfish/Seafood
Heavy Duty Cooker, Built for Life.
Our Heavy Duty cooker is constructed out of 3/16 thick aluminum. Made to withstand daily use.
Propane $900
Natural Gas $1,500
Cooker vessel is 3/16" thick.
Save money by cooking crawfish yourself. This small cooker will pay for itself in 6 to 9 sacks of crawfish!
Cooker Features:
All one piece, easy to carry.
Perforated sheet made into a structural basket.
1 1/4" Drain valve on bottom for easy washing and draining.
Max capacity 1.6 sacks of crawfish.
Total capacity
21 gallons
85 quarts
Non corrosive burner system. Dual jets, that wont rust. Unlike a cast iron burner.
Thick stainless steel lid hinge pins.
Initial boiling time from a cold water to a boil 15-25 minutes. (varies)
Carrying handles on each side.
Dry weight for this cooker is about 38lbs.
Efficient & fast burners.
Tried and tested vessel design allows more yield per propane bottle, saving you time and money.
Best price in the market for the thickness and capacity.
Fully welded on the inside for longevity against pitting in between the welds, unlike others they take the easy way and weld the outside.
We recommend using a 70 qt cooler, or any cooler over 25" in length to allow the lid to dump crawfish into the cooler.
Natural gas models available.
You must have a 3/4 line or bigger and at least 4 lbs of pressure.
Propane pressure regulator included.
Available options:
*Swamp Fire Seasoning
30lbs-$60.00
15lbs-$35.00
*Extended hook and roll handle, $30.00 (Hooks on cooker and allows you to roll a full cooker safely, please refer to the pictures on our gallery.)
*Custom name on lid $40.00 - $80.00
*8" Solid wheels $45
*Aluminum paddle $15
Be aware of cheap imitations similar to our cookers made with 1/8 aluminum, at similar cost.
Don't let all the extra fancy moving parts on other cookers fool you, the best part is no part.
Proudly Made in Texas with 100% made American aluminum, and hardware!
Not recommended for inside use.
Proper ventilation is required during use.
End user is responsible to follow local and state codes.
Not NSF or UL Approved.
3 Sack / 128qt
Crawfish/Seafood Heavy Duty Cooker, Built for Life.
Our Heavy Duty cooker is constructed out of 3/16 thick aluminum. Made to withstand daily use.
Propane $1,200
Natural Gas $1,800
Cooker vessel is 3/16" thick.
Save money by cooking crawfish yourself. This large cooker will pay for itself in 9 to 12 sacks of crawfish!
Cooker Features:
All one piece, easy to carry.
Perforated sheet made into a structural basket.
1 1/4" Drain valve on bottom for easy washing and draining.
Aluminum paddle included
Max capacity 3 sacks of crawfish.
Total capacity
32 gallons
128 quarts
Non corrosive burner system. Dual jets, that wont rust. Unlike a cast iron burner.
Thick stainless steel lid hinge pins.
Initial Boiling time from a cold water to a boil 20-30 minutes. (varies)
Carrying handles on each side.
Dry weight for this cooker is about 49lbs.
Efficient & fast burners.
Tried and tested vessel design allows more yield per propane bottle, saving you time and money.
Best price in the market for the thickness and capacity.
Fully welded on the inside for longevity against pitting in between the welds, unlike others they take the easy way and weld the outside.
We recommend using a 70 qt cooler, or any cooler over 26" in length to allow the lid to dump crawfish into the cooler.
Natural Gas Models available.
You must have a 3/4 line or bigger and at least 4 lbs of pressure.
Propane pressure regulator included.
Available options:
*Swamp Fire Seasoning
30lbs-$60.00
15lbs-$35.00
*Extended hook and roll handle, $30.00 (Hooks on cooker and allows you to roll a full cooker safely, please refer to the pictures on our gallery.)
*Custom name on lid $40.00 - $80.00
8" Solid wheels $45
Be aware of cheap imitations similar to our cookers made with 1/8 aluminum, at similar cost.
Don't let all the extra fancy moving parts on other cookers fool you, the best part is no part.
Proudly Made in Texas with 100% made American aluminum, and hardware!
Not recommended for inside use.
Proper ventilation is required during use.
End user is responsible to follow local and state codes.
Not NSF or UL Approved.
To order email: TXCRAWFISHCOOKERS@GMAIL.COM
Or Call, Mon - Fri 9am - 5pm
409.718.8685
Manufactured in Port Arthur, Texas
© Copyright 2013 Southeast Texas CNC, LLC. All images are copyright, no reproduction without permission. Website revised 1/18/2023